Profile: EL defect tester is used to identify layup errors, bad welding, pollution, micro-cracks, mixed cells and other invisible defects in solar modules.
Profile: Solar Panel Laminating Machine is one of the most critical processes in the solar panel manufacturing production flow, it ensures the quality of solar panel.
Profile: Topcon，HJT，IBC, HBC, Solar simulator IV tester SUNPOWER Solar Panel Tester, A level, is used to test the electric performance of Mono-Si or Poly-Si solar modules and record the results in files.
Profile: MBB solar cell tabber and stringer is a fully automatic machine used to non-destructively cut the mono-Si or poly-Si cells and then solder them into a string.
Profile: Shingled solar cell terminal head welding machine is an automatic equipment to do welding at both heads of solar module string cells with the ribbon.
Profile: Shingled Solar cell welding stringer is an automatic equipment to weld the solar cells into strings by curing the conductive adhesive and collect the welded strings (or transfer them directly to the later process).
Profile: Solar cell tabber and stringer is suitable for soldering crystalline silicon solar cells into a string.
MBB solar cell tabber and stringer can support 20BB.
Customers can choose to customize all white or blue and white.
Profile: Solar Panel EL Defect Tester is used to test the solar cell crack，breakage, black spot，mixed wafers，process defect，cold solder Joint phenomenon.
Profile: Tabber Stringer Machine could reduce the resistance loss of bus bars, improve the efficiency of solar cells and improve the optical utilization of ribbon area on module surface. In addition, MBB technology could greatly reduce silver consumption t
Profile: Solar Cell String Bussing Machine is used to adopt the method of separating the cell string from the glass, and grab the cell string in the air, then to interconnected solder the head, middle and tail bus bar of the middle wire edition module at a certain
Profile: Solar cell laser scribing machine is suitable for scribing or cutting the Solar Cells and Silicon Wafers in solar PV industry, including the mono-si and poly-si solar cells and silicon wafer.
Profile: Tabber and stringer machine is to weld the solar cells one by one through copper ribbon, and the cells are connected in series to form a string, OCH-MS40K speed is 3600 PCS/Hour, OCH-MS100B speed is 7000 PCS/Hour.
